Garmin Software Version 0764.14 Guia do Utilizador Página 119

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 184
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 118
Cirrus Perspective
by Garmin – Cockpit Reference Guide for the SR20/SR22/SR22T
190-00821-08 Rev. A 103
Additional Features
Flight
Instruments EIS
Nav/Com/
XPDR/Audio AFCS GPS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
Alerts Appendix Index
Pitch Engagement
ESP
engagesat17.5°nose-upand15.5° nose-down. Once ESP
is engaged, it
willapplyopposingforcebetween17.5°and50°nose-upandbetween15.5°and50°
nose-down.Maximumopposingforceisappliedbetween22.5°and50° nose-up and
between20.5°and50° nose-down.
With ESP
engaged, and the aircraft in a nose-up condition, opposing force steadily
decreasesfrom17.5°nose-upto12.5° nose-up as aircraft pitch moves toward zero
degrees. ESP
disengagesat12.5° nose-up. With ESP
engaged, and the aircraft in
anose-downcondition,opposingforcesteadilydecreasesfrom15.5° nose-down to
10.5° nose-down as aircraft pitch moves toward zero degrees. ESP
disengages at
10.5° nose-down.
The opposing force increases or decreases depending on the pitch angle and the
direction of pitch travel. This force is intended to encourage movement in the pitch
axis in the direction of the normal pitch attitude range for the aircraft.
There are no indications marking the pitch ESP
engage and disengage limits in
these nose-up/nose-down conditions.
High Airspeed Protection
Exceeding Vne will result in ESP
applying force to raise the nose of the aircraft.
When the high airspeed condition is remedied, ESP
force is no longer applied.
PILOT PROFILES
Creating a profile:
1)
Use the FMS Knob to select the AUX - System Setup Page.
2)
Press the FMS Knob momentarily to activate the flashing cursor.
3)
Turn the large FMS Knob to highlight ‘CREATE’ in the Pilot Profile Box.
4)
Press the ENT Key. A ‘Create Profile’ window is displayed.
5)
Use the FMS Knob to enter a profile name up to 16 characters long and
press the ENT Key. Pilot profile names cannot begin with a blank as the
first letter.
6)
In the next field, use the small FMS Knob to select the desired settings
upon which to base the new profile. Profiles can be created based on
Garmin factory defaults, default profile settings (initially based on Garmin
factory defaults unless edited by the pilot), or current system settings.
Vista de página 118
1 2 ... 114 115 116 117 118 119 120 121 122 123 124 ... 183 184

Comentários a estes Manuais

Sem comentários