
Cirrus Perspective
™
by Garmin – Cockpit Reference Guide for the SR20/SR22/SR22T
190-00821-10 Rev. A 69
Hazard Avoidance
Flight
Instruments EIS
Nav/Com/
XPDR/Audio AFCS GPS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
Alerts Appendix Index
Weather Request
Status Message
Description
Auto requests inhibited
Send manual request to
reset.
The system has disabled automatic weather data requests
due to excessive errors. Automatic weather data requests
have stopped. Send a manual weather data request to
resume automatic updates.
Auto update retry: ##
Seconds
The system will attempt another automatic weather data
request after an error occurred during the previous request.
Timer counts down until the next automatic request occurs.
Connext Comm Error [2] A communications error has occurred with the GIA. The
system should be serviced.
Connext Comm Error [4] This occurs if multiple automatic weather data requests have
recently failed, or the GDL 59 or a GIA is off-line.
Connext Comm Error [5] The Iridium or Connext networks are not accessible. Check
Iridium signal strength. If this error persists, the system
should be serviced.
Connext Comm Error [6] A communications error has occurred. It this error persists,
the system should be serviced.
Connext Comm Error [7] A weather data transfer has timed out. Check Iridium signal
strength and re-send the data request.
Connext Comm Error [8] A server error has occurred or invalid data received.
Connext Login Invalid There is a problem with the Connext registration. Contact
Garmin Connext at
1-866-739-5687 in the United States or
(011) 913-440-1135
for assistance.
Connext Server
Temporarily Inop
The Connext weather data server is temporarily out of
service, but is expected to return to service in less than 30
minutes.
Connext Server Inop The Connext weather data server will be out of service for at
least 30 minutes.
Invalid Coverage Area The weather data request coverage area does not contain
at least one of the following: a waypoint, a flight plan, or a
flight plan destination. Verify at least one of the coverage
options is enabled (checked) and contains required criteria,
then re-send the data request.
Comentários a estes Manuais