Garmin Software Version 0534.21 Guia do Utilizador Página 127

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 134
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 126
Garmin G1000 Cockpit Reference Guide for the Cessna Corvalis/Corvalis TT
190-00567-05 Rev. A
Appendix
111
Flight
Instruments EIS
Nav/Com/
XPDR/Audio AFCS GPS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
Alerts Appendix Index
12)
Turn system power OFF.
13)
Remove the SD card from the top card slot of the MFD.
14)
Turn system power ON.
15)
Press the ENT Key to acknowledge the startup screen.
16)
Turn the large FMS Knob to select the AUX Page group on the MFD.
17)
Turn the small FMS Knob to select the System Status Page.
18)
Press the Display Database Selection Softkey to show standby navigation
database information for each display (MFD1 DB, PFD1 DB). Verify the
correct standby navigation database cycle information is shown for each
display.
Magnetic Field Variation Database Update
At startup, the system compares this version of the MV DB with that presently being
used by each AHRS (GRS1 and GRS2). If the system determines the MV DB needs
to be updated, a prompt is displayed on the Navigation Map Page, as shown in the
following figure. Note, in the following example, GRS1 is the first AHRS to indicate
an update is available. In actuality, this is dependent on which AHRS is the first to
report status to the system. GRS2 may be displayed before GRS1. The order is not
important, only that both AHRS be updated.
GRS1 Magnetic Field Variation Database Update Prompt
Loading the magnetic field variation database update:
1)
With ‘OK’ highlighted, as shown in the previous figure, press the ENT Key
on the MFD. A progress monitor is displayed as shown in the following
figure.
Vista de página 126

Comentários a estes Manuais

Sem comentários