Garmin GWS 10 Manual do Utilizador descarregar pdf

September 2008 Part Number 190-01016-01 Rev. A Printed in Taiwan

GWS

™

10 Sensor Conguration Guide

See the Important Safety and Product Information guide in the product box for product warnings and

other important information.

The GWS 10 provides wind angle and speed information for various screens, data elds,

or digital gauges of NMEA 2000

-compatible connected display devices. For a list of

compatible Garmin chartplotters and devices, visit www.garmin.com.

Important: This document provides specic conguration information for the

GWS 10 using your NMEA 2000-compatible chartplotter or marine instrument (such

as a GPSMAP

5212 or GMI

™

10). To access the NMEA 2000 device conguration

information on your device, consult the documentation provided with your device.

Conguring the Wind Angle Offset (Orientation)

When mounting the sensor, you must adjust the angle offset if you did not orient the

GWS 10 as described in the GWS 10 Installation Instructions.

To congure the wind angle offset (orientation):

1. While viewing the NMEA 2000 device information, select Cong > Wind Angle Offset.

2. Select the angle in degrees to adjust for the difference in orientation.

To congure the wind speed lter if the menu option is not displayed:

1. Select Generic Conguration to specify data for the lter and offset settings.

2. Enter the following command: “SPEEDFILTER=”

3. Follow the command with a number between 0 and 254, representing a time constant

in increments of 0.25 second, or 255 to represent the Automatic setting (for example:

SPEEDFILTER=215).

1 2

September 2008 Part Number 190-01016-01 Rev. A Printed in TaiwanGWS™ 10 Sensor Conguration Guide See the Important Safety and Product Information

TIP: The angles are congured clockwise around the mast of the boat. For example, 90 degrees is on the starboard side of the boat, and 270 degrees i

Sem comentários

Garmin GWS 10 Manual do Utilizador