Garmin zumo 665, NA Manual de Instalação descarregar pdf







Incorrectly wiring the power cable with bare wire leads can result in damage to the vehicle or

the battery and can cause bodily injury. Garmin strongly recommends having an experienced

installer with the proper knowledge of electrical systems install the unit.

See the Important Safety and Product Information guide in the product box for product

warnings and other important information.

Do not use the suction cup mount on a motorcycle.



Select a suitable and secure location to mount the zūmo on your motorcycle, based on

available power sources and safe cable routing.

Cradle

Headphone/audio out jack (3.5 mm)

Microphone jack (2.5 mm)

Mini-USB connector

(for GXM 40 Antenna)

Bare wires with

inline fuse for

power connection

Power cable



notice

The recommended torque is 50 lbf-in. Do not exceed torque of 80 lbf-in.

The zūmo includes parts for two handlebar installation solutions. Custom mounts can require

additional hardware (www.ram-mount.com).



1. Place the U-bolt around the handlebar, and thread the ends through the handlebar base.

2. Tighten the nuts to secure the base. Do not overtighten.

Handlebar

base

Handlebar

U-bolt

1 2 3 4

 2

Resumo do Conteúdo

Página 1

Incorrectly wiring the power cable with bare wire leads can result in damage to the vehicle or the battery

Página 2 - 

Incorrectly installing the handlebar base to the clutch/brake brack

Página 3

CradlePower cableRelease button1. Pressthebuttononthesideofthemounttoreleasethezūmo.2. Liftoutthe

Página 4

2. Remove the clear plastic from the suction cup. Clean and dry your windshield and the suction cup with a lint-free cloth. 3. Place the suction cup