Garmin Software Version 0370.14 Guia do Utilizador descarregar pdf (Página 15)

100

Garmin G1000 Cockpit Reference Guide for the DA42

1-3

SECTION 1

SYSTEM OVERVIEW

(1) NAV VOL/ID Knob – Controls the NAV audio level.

Press to toggle the Morse code identiﬁer ON and OFF.

Volume level is shown in the ﬁeld as a percentage.

(2) NAV Frequency Toggle Key – Toggles the standby

and active NAV frequencies.

(3) Dual NAV Knob – Tunes the MHz (large knob)

and kHz (small knob) standby frequencies for the NAV

receiver. Press to toggle the tuning cursor (light blue box)

between the NAV1 and NAV2 ﬁelds.

(4) Heading Knob – Turn to manually select a heading

on the HSI. When pressed, it synchronizes the heading

bug with the compass lubber line.

(5) Joystick – Changes the map range (distance top to

bottom of map display) when rotated. Activates the map

pointer when pressed.

(6) CRS/BARO Knob – The large knob sets the altimeter

barometric pressure and the small

knob adjusts the course.

The course is only adjustable when the HSI is in VOR1,

VOR2, or OBS/SUSP mode. Pressing this knob centers

the CDI on the currently selected VOR.

(7) Dual COM Knob – Tunes the MHz (large knob)

and kHz (

small knob) standby frequencies for the COM

transceiver. Pressing this knob toggles the tuning cursor

(light blue box) between the COM1 and COM2 ﬁelds.

(8) COM Frequency Toggle Key – Toggles the standby

and active COM frequencies. Pressing and holding this

key for two seconds automatically tunes the emergency

frequency (121.5 MHz) in the active frequency ﬁeld.

(9) COM VOL/SQ Knob – Controls COM audio level.

Pressing this knob turns the COM automatic squelch ON

and OFF. Audio volume level is shown in the ﬁeld as a

percentage.

(10) Direct-to Key – Allows the user to enter a destination

waypoint and establish a direct course to the selected

destination (speciﬁed by the identiﬁer, chosen from the

active route, or taken from the map pointer position).

(11) FPL Key – Displays the active Flight Plan Page for

creating and editing the active ﬂight plan, or for accessing

stored ﬂight plans.

(12) CLR Key (DFLT MAP) – Erases information,

cancels an entry, or removes page menus. To display the

Navigation Map Page immediately, press and hold CLR

(MFD only).

(13) Dual FMS Knob – Used to select the page to be

viewed (only on the MFD). The large knob selects a page

group (MAP, WPT, AUX, NRST), while the small knob

selects a speciﬁc page within the page group. Pressing the

small knob turns the selection cursor ON and OFF.

(14) MENU Key – Displays a context-sensitive list of

options. This list allows the user to access additional

features, or to make setting changes that relate to certain

pages.

(15) PROC Key – Selects approaches, departures and

arrivals from the ﬂight plan. If a ﬂight plan is used,

available procedures for the departure and/or arrival

airport are automatically suggested. If a ﬂight plan is not

used, the desired airport and the desired procedure may

be selected. This key selects IFR departure procedures

(DPs), arrival procedures (STARs) and approaches (IAPs)

from the database and loads them into the active ﬂight

plan.

(16) ENT Key – Accepts a menu selection or data entry.

This key is used to approve an operation or complete data

entry. It is also used to conﬁrm selections and information

entries.

(17) Dual ALT Knob – Sets the reference altitude in the

box located above the Altimeter. The large knob selects the

thousands, while the small knob selects the hundreds.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 99 100

Comentários a estes Manuais

Sem comentários

Garmin Software Version 0370.14 Guia do Utilizador Página 15

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de navegação Garmin Software Version 0370.14