Garmin Software Version 0370.14 Guia do Utilizador Página 34

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 100
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 33
Garmin G1000 Cockpit Reference Guide for the DA42
4-4
SECTION 4 – NAV/COM &
TRANSPONDER
DME Radio (optional)
The tuning window is displayed by pressing the ADF/
DME Softkey (if no ADF is installed, the softkey will be
labeled DME).
Figure 4-8 Radio Tuning Window
To change the DME tuning source:
1) From the tuning window, turn the large
FMS
Knob to highlight the DME source field.
2) Turn the small
FMS
Knob to display the
selection window. Turn the
FMS
Knobs to select
the desired mode and press the
ENT
Key.
Figure 4-9 DME Selection Window
4.6 FREQUENCY AUTO-TUNING
Auto-tuning on the PFD
Figure 4-10 Nearest Airports Window (PFD)
1) Press the
NRST
Softkey to display the Nearest
Airports Window.
2) Turn the
FMS
Knobs to highlight the desired
frequency.
3) Press the
ENT
Key to place the frequency in the
standby field of the active COM.
4) Press the
Frequency Toggle
Key to place the
frequency in the active field.
NAV frequencies are entered automatically in the NAV
active frequency field upon approach loading or approach
activation.
Auto-tuning on the MFD
Auto-tuning on the MFD is done in much the same way
as on the PFD. Use the FMS Knobs to select the desired
frequency on any of the information pages. Pressing the
ENT Key then loads the selected frequency in the tuning
box as a standby frequency.
Vista de página 33
1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 99 100

Comentários a estes Manuais

Sem comentários