
190-00600-01 Rev. C
Garmin G1000 Cockpit Reference Guide for the Cessna Citation Mustang
66
Annunciations & Alerts
GIA 63W Message Advisories (Cont.)
Message Comments
NAV1 SERVICE
– NAV1 needs
service. Return unit for repair.
A failure has been detected in the NAV1
and/or NAV2 receiver. The receiver may still
be available. The G1000 system should be
serviced.
NAV2 SERVICE
– NAV2 needs
service. Return unit for repair.
NAV1 RMT XFR
– NAV1 remote
transfer key is stuck.
The remote NAV1 and/or NAV2 transfer
switch is stuck in the enabled (or “pressed”)
state. Press the transfer switch again to cycle
its operation. If the problem persists, the
G1000 system should be serviced.
NAV2 RMT XFR
– NAV2 remote
transfer key is stuck.
G/S1 FAIL
– G/S1 is inoperative. A failure has been detected in glideslope
receiver 1 and/or receiver 2. The G1000
system should be serviced.
G/S2 FAIL
– G/S2 is inoperative.
G/S1 SERVICE
– G/S1 needs service.
Return unit for repair.
A failure has been detected in glideslope
receiver 1 and/or receiver 2. The receiver may
still be available. The G1000 system should
be serviced when possible.
G/S2 SERVICE
– G/S2 needs service.
Return unit for repair.
GEA 71 Message Advisories
Message Comments
GEA1 CONFIG
– GEA1 config error.
Config service req’d.
The GEA1 configuration settings do not
match those of backup configuration memory.
The G1000 system should be serviced.
GEA2 CONFIG
– GEA2 config error.
Config service req’d.
The GEA2 configuration settings do not
match those of backup configuration memory.
The G1000 system should be serviced.
MANIFEST
– GEA1 software
mismatch, communication halted.
The #1 GEA 71 has incorrect software
installed. The G1000 system should be
serviced.
MANIFEST
– GEA2 software
mismatch, communication halted.
The #2 GEA 71 has incorrect software
installed. The G1000 system should be
serviced.
Comentários a estes Manuais