Garmin GHC 20 Control Unit Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para não Garmin GHC 20 Control Unit. Garmin GHC 20 Control Unit Flat Mount Template Manual do Utilizador

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 2
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 0
Printing a Mounting Template
NOTICE
These instructions for printing a mounting template must be followed precisely. Failure to do so may result in incorrect dimensions on the
template and an incorrect cutout (too large or too small) on the mounting surface of your boat.
To print the attached mounting template, check the dimensions of the template and select the appropriate size of paper. Both the length and
width measurements are indicated on the template.
The paper size must be larger than the dimensions of the template. Select the paper size using the Properties button in the Adobe Acrobat print
dialog box.
Select Auto-Rotate and Center to ensure the template prints in the correct orientation.
IMPORTANT: When printing the ush mount template, set Page Scaling in the Adobe Acrobat print dialog box to None.
Page Scaling:
Select None:
Auto-Rotate and Center:
Select with a check mark
for correct orientation
Properties: Select
the paper size.
Paper size (example):
Use appropriate size paper.
NOTICE
After printing and before cutting the mounting surface, measure the printed template to ensure both the length and the width printed at the
correct size and to ensure that the dimensions of the printed template match the actual size of your mount. Garmin is not responsible for any
damages or expenses resulting from a miscut mounting surface arising from a failure to follow these instructions.
Vista de página 0
1 2

Resumo do Conteúdo

Página 1 - Printing a Mounting Template

Printing a Mounting TemplateNOTICEThese instructions for printing a mounting template must be followed precisely. Failure to do so may result in incor

Página 2 - Flat Mount Template

May 2013 190-01609-04_0A Printed in TaiwanGHC™ 20 and GMI™ 20Flat Mount Template1/4 in.(6 mm) 0.315 in.8.0 mm0.19 in.4.8 mm

Comentários a estes Manuais

Sem comentários