Garmin Legacy Software Versions Guia do Utilizador Página 60

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 110
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 59
Garmin G1000 Cockpit Reference Guide for the Cessna Nav III
8-8
SECTION 8 – FLIGHT PLANNING
Figure 8-17 Vertical Navigation (VNAV) Page
To create a vertical navigation profile:
1. Select the Vertical Navigation Page.
2. Press the
FMS
knob to activate the cursor.
3. With the ‘TARGET ALTITUDE’ field highlighted,
turn the
small and large FMS
knobs to select
the target altitude and press the
ENT
key.
4. Turn the
small FMS
knob to select Above
Wpt’ (AGL) or ‘MSL’, and press the
ENT
key.
Above Wpt’ uses the altitude of a destination
airport. ‘MSLlets you set a specific target alti-
tude for any waypoint category: airport, VOR,
NDB, intersection or user waypoint.
5. Turn the
small and large FMS
knobs to select
a distance from the target reference waypoint
and press the
ENT
key. If the target altitude
should occur at the target reference waypoint,
enter a distance of zero.
6. Turn the
small FMS
knob to select ‘Before’ or
After’, and press the
ENT
key. This setting
designates whether the offset distance defines
a point before you reach the target reference
waypoint or after you reach the waypoint.
7. When using a flight plan, the target reference
waypoint itself can be specified from the way
-
points contained in the flight plan. By default,
the last waypoint in the flight plan is selected.
To select a different waypoint, turn the
small
FMS
knob to select the desired waypoint and
press the
ENT
key.
8. The default profile utilizes a 400 foot-per-
minute descent rate. To change the rate, turn
the
large FMS
knob to highlight the Target
Vertical Speed’ field and use the small and
large FMS
knobs to enter a new rate. Press the
ENT
key when finished.
Vista de página 59
1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 109 110

Comentários a estes Manuais

Sem comentários