
Garmin G1000 Cockpit Reference Guide for the Cessna Citation Mustang
190-00600-04 Rev. A
8
Nav/Com/XPDR/Audio Panel
Flight
InstrumentsEICAS
Nav/Com/
XPDR/AudioAFCSGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
AlertsAppendixIndex
ENTER A TRANSPONDER CODE
1)
Press the XPDR Softkey (XPDR/TFC if the TCAS II option is available).
2)
Press the CODE Softkey to display the transponder code selection softkeys,
for digit entry.
3)
Press the digit softkeys to enter the code in the code field. When entering
the code, the next key in sequence must be pressed within 10 seconds, or
the entry is cancelled and restored to the previous code. Five seconds after
the fourth digit has been entered, the transponder code becomes active.
SELECT TRANSPONDER MODE
With TCAS II Option
1)
Press the XPDR/TFC Softkey.
2)
Press the MODE Softkey to display the transponder mode selection
softkeys.
3)
Press the desired transponder mode softkey (STBY, ON, or ALT).
Without TCAS II Option
1)
Press the XPDR Softkey.
2)
If the aircraft is equipped with two transponders, press the XPDR1 or
XPDR2 Softkey to select the active transponder.
3)
Press the desired transponder mode softkey (STBY, ON, ALT, or GND).
SELECTING A COM RADIO
Transmit/Receive
Press the COM1 MIC
,
COM2 MIC
, or
COM3 MIC Key (if installed) on the
audio panel.
Receive Only
Press the COM1, COM2
, or
COM3 Key (if installed) on the audio panel.
Comentários a estes Manuais