
Garmin G1000 Cockpit Reference Guide for the Cessna Citation Mustang
190-00600-04 Rev. A
28
Flight Planning
Flight
InstrumentsEICAS
Nav/Com/
XPDR/AudioAFCSGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
AlertsAppendixIndex
3)
Enter a user waypoint name (up to six characters).
4)
Press the ENT Key to accept the selected name.
5)
If desired, define the type and location (i.e., LAT/LON, RAD/RAD or RAD/
DIS) of the waypoint.
6)
Press the ENT Key to accept the new waypoint.
7)
If desired, change the storage method of the waypoint to “TEMPORARY” or
“NORMAL” by moving the cursor to “TEMPORARY” and selecting the ENT
Key to check or uncheck the box.
8)
Press the FMS Knob to remove the flashing cursor.
9)
Press the GO BACK Softkey to return to the map page.
DELETE A USER WAYPOINT
1)
Turn the large FMS Knob to select the ‘WPT’ page group.
2)
Turn the small FMS Knob to select the User WPT Information Page.
3)
Press the FMS Knob to activate the cursor.
4)
Turn the large FMS Knob to the place the cursor in the ‘USER WAYPOINT LIST’
field.
5)
Turn the small FMS Knob to highlight the desired waypoint.
6)
Select the DELETE Softkey.
7)
The message ‘Would you like to delete the user waypoint?’ is displayed. With
‘YES’ highlighted, press the ENT Key.
CREATE A FLIGHT PLAN
NOTE: When creating a flight plan in the Active Flight Plan Window, the first
leg is activated automatically after it is created.
Creating an active flight plan using the Quick Select Box (MFD only):
1)
Press the FPL Key.
2)
Begin entering the identifier of the departure waypoint using the MFD
Control Unit’s alphanumeric keys. The Waypoint Information Window is
displayed as the identifier is entered.
Comentários a estes Manuais