Garmin Software Version 0435.24 Guia do Utilizador Página 55

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 136
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 54
Garmin G1000 Cockpit Reference Guide for the Cessna Citation Mustang
190-00600-04 Rev. A 39
Procedures
Flight
Instruments EICAS
Nav/Com/
XPDR/Audio AFCS GPS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
Alerts Appendix Index
PROCEDURES
LOAD AND ACTIVATE A DEPARTURE PROCEDURE
1)
Press the PROC Key.
2)
Turn the large FMS Knob to highlight ‘SELECT DEPARTURE’.
3)
Press the ENT Key. The cursor is displayed in the ‘DEPARTURE’ field with a
list of available departures.
4)
Turn the large FMS Knob to highlight the desired departure.
5)
Press the ENT Key. A list of runways may be displayed for the departure. If
so, turn either FMS Knob to select the desired runway.
6)
Press the ENT Key. The cursor is displayed in the ‘TRANSITION’ field with a
list of available transitions.
7)
Turn the large FMS Knob to highlight the desired transition.
8)
Press the ENT Key.
9)
With ‘LOAD?’ highlighted, press the ENT Key. The departure is active when
the flight plan is active.
ACTIVATE A DEPARTURE LEG
Activate leg using the Quick Select Box:
1)
Press the FPL Key on the MFD Control Unit to display the active flight plan.
2)
Use the Joystick to move the Quick Select Box to the TO waypoint of the
desired leg within the departure.
3)
Press the ACT LEG Softkey. A confirmation window showing the selected
leg is displayed.
4)
With ACTIVATE’ highlighted, press the ENT Key.
Activate leg using the cursor:
1)
Press the FPL Key on the MFD Control Unit to display the active flight plan.
2)
Press the FMS Knob to activate the cursor.
3)
Turn the large FMS Knob to highlight the TO waypoint of the desired leg
within the departure.
Vista de página 54
1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 135 136

Comentários a estes Manuais

Sem comentários