Garmin Software Version 0563.05 Guia do Utilizador Página 19

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 190
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 18
Garmin G1000 Cockpit Reference Guide for the Cessna Nav III
190-00384-08 Rev. A
1-7
SECTION 1
SYSTEM OVERVIEW
GPS
Displays GPS waypoint identifier and GPS
distance information in the BRG2 Information
Window.
ADF
Displays ADF in the BRG2 Information
Window when an otional ADF is installed.
OFF
Removes the BRG2 Information
Window.
ALT UNIT
Displays softkeys for setting the
altimeter and BARO settings to metric units:
METERS
When enabled, displays altimeter in
meters.
IN
Press to display the BARO setting as inches
of mercury.
HPA
Press to display the BARO setting as
hectopacals.
STD BARO
Press to set the barometric pressure
to standard pressure.
BACK
Press to return to the previous level softkeys.
ALERTS
– Press to display the Alerts Window.
OBS Press to select OBS Mode on the CDI when
navigating by GPS (only available with active leg).
CDI Press to change navigation mode on the CDI
between GPS, VOR1, and VOR2.
DME (optional) Press to display the DME Tuning
Window.
Press the BACK Softkey to return
to the top-level softkeys.
Press the BACK Softkey to return
to the top-level softkeys.
ALERTS
ALERTS
DME
ALERTS
Figure 1-5 XPDR (Transponder) Softkeys
XPDR Press to display the transponder mode
selection softkeys.
STBY
– Press to select Standby Mode.
ON
– Press to select Mode A.
ALT
– Press to select Altitude Reporting Mode.
GND
– Press to select Ground Mode.
VFR
Press to automatically squawk 1200 (only
in the U.S.A., refer to ICAO standards for VFR
codes in other countries).
CODE
– Press to display transponder code selection
softkeys 0-7.
0 through 7
– Press numbers to enter code.
IDENT
Press to provide special aircraft
position identification to Air Traffic Control
(ATC).
BKSP
Press to remove numbers entered one
at a time.
BACK
Press to return to the previous level
softkeys.
IDENT
Press to provide special aircraft position
identification to Air Traffic Control (ATC).
BACK
Press to return to the previous level
softkeys.
ALERTS
– Press to display the Alerts Window.
Vista de página 18
1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 189 190

Comentários a estes Manuais

Sem comentários