Garmin Software Version 0857.09 Guia do Utilizador Página 26

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 118
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 25
Garmin G1000 Cockpit Reference Guide for the Beechcraft G58
190-00526-03 Rev. A
10
Nav/Com/XPDR/Audio Panel
Flight
InstrumentsEIS
Nav/Com/
XPDR/AudioAFCSGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
AlertsAppendixIndex
SELECTING A COM RADIO
Transmit/Receive
Press the COM1 MIC
,
COM2 MIC
, or
COM3 MIC Key (optional COM, if
installed) on the audio panel.
Receive Only
Press the COM1, COM2
, or
COM3 Key (optional COM, if installed) on the
audio panel.
SELECTING A NAV RADIO
1)
To begin navigating using a navigation radio, press the CDI Softkey on the
PFD to select VOR1/LOC1 (NAV1) or VOR2/LOC2 (NAV2).
2)
Press the NAV1
,
NAV2
,
DME
,
or ADF
Key on the audio panel to select or
deselect the navigation radio audio source. All radio keys can be selected
individually or together.
NAV/COM TUNING
1)
Press the small tuning knob to select the desired radio for tuning. A light
blue box highlights the radio frequency to be tuned.
2)
Turn the respective tuning knobs to enter the desired frequency into the
standby frequency field. The large knob enters MHz and the small knob
enters kHz.
3)
Press the Frequency Transfer Key to place the frequency into the active
frequency field.
SPLIT COM
During Split COM operation, both the pilot and the copilot can transmit
simultaneously over separate radios. The pilot can still monitor NAV1, NAV2, ADF,
DME, and MKR Audio as selected, but the copilot is only able to monitor COM2.
When Split COM operation is selected, COM1 is used by the pilot and COM2 is
used by the copilot. The COM1 MIC Annunciator flashes when the pilot’s microphone
PTT is pressed. The COM2 MIC Annunciator flashes when the copilot’s microphone
PTT is pressed.
Pressing the COM 1/2 Key selects Split COM operation. The COM 1/2 Annunciator
is illuminated indicating Split COM operation. COM1 and COM2 frequencies are
displayed in green indicating that both transceivers are active. Split COM operation
is cancelled by pressing the COM 1/2 Key again, at which time the annunciator is
extinguished.
Vista de página 25
1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 117 118

Comentários a estes Manuais

Sem comentários