Garmin Software Version 0857.09 Guia do Utilizador Página 96

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 118
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 95
Garmin G1000 Cockpit Reference Guide for the Beechcraft G58
190-00526-03 Rev. A
80
Annunciations & Alerts
Flight
InstrumentsEIS
Nav/Com/
XPDR/AudioAFCSGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
AlertsAppendixIndex
MISCELLANEOUS MESSAGE ADVISORIES (CONT.)
Message Comments
NO WGS84 WPT
– Non WGS 84
waypoint for navigation -[xxxx]
The position of the selected waypoint [xxxx]
is not calculated based on the WGS84 map
reference datum and may be positioned in error
as displayed. Do not use GPS to navigate to the
selected non-WGS84 waypoint.
TRAFFIC FAIL
Traffic device has
failed.
The system is no longer receiving data from the
traffic system. The traffic device should be serviced.
FAILED PATH
A data path has failed.
A data path connected to the GDU, GSD 41, or
the GIA 63/W has failed.
MAG VAR WARN
– Large magnetic
variance. Verify all course angles.
The GDU’s internal model cannot determine the
exact magnetic variance for geographic locations
near the magnetic poles. Displayed magnetic
course angles may differ from the actual
magnetic heading by more than 2°.
SVS
– SVS DISABLED: Out of available
terrain region.
Synthetic Vision is disabled because the aircraft is
not within the boundaries of the installed terrain
database.
SVS
– SVS DISABLED: Terrain DB
resolution too low.
Synthetic Vision is disabled because a terrain
database of sufficient resolution (9 arc-second or
better) is not currently installed.
SCHEDULER [#]
– <message>.
Message criteria entered by the user.
CHECK CRS
– Database course for
LOC1 / [LOC ID] is [CRS]°.
Selected course for LOC1 differs from published
localizer course by more than 10 degrees.
CHECK CRS
– Database course for
LOC2 / [LOC ID] is [CRS]°.
Selected course for LOC2 differs from published
localizer course by more than 10 degrees.
[PFD1 or MFD1]
CARD 1 REM
Card 1 was removed. Reinsert card.
The SD card was removed from the top card slot
of the PFD or MFD. The SD card needs to be
reinserted.
[PFD1 or MFD1]
CARD 2 REM
Card 2 was removed. Reinsert card.
The SD card was removed from the bottom card
slot of the PFD or MFD. The SD card needs to be
reinserted.
Vista de página 95
1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 117 118

Comentários a estes Manuais

Sem comentários