
Garmin G1000 Cockpit Reference Guide for the Beechcraft G58
190-00526-03 Rev. A
69
Annunciations & Alerts
Flight
Instruments EIS
Nav/Com/
XPDR/Audio AFCS GPS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
Alerts Appendix Index
DATABASE MESSAGE ADVISORIES (CONT.)
Message Comments
MFD1 DB ERR
– MFD1 airport
terrain database error exists.
The MFD and/or PFD detected a failure in the
airport terrain database. Ensure that the data card
is properly inserted. Replace data card. If problem
persists, the system should be serviced.
PFD1 DB ERR
– PFD1 airport
terrain database error exists.
MFD1 DB ERR
– MFD1 airport
terrain database missing.
The airport terrain database is present on another
LRU, but is missing on the specified LRU.
PFD1 DB ERR
– PFD1 airport
terrain database missing.
MFD1 DB ERR
– MFD1 Safe Taxi
database error exists.
The MFD and/or PFD detected a failure in the
Safe Taxi database. Ensure that the data card is
properly inserted. Replace data card. If problem
persists, the system should be serviced.
PFD1 DB ERR
– PFD1 Safe Taxi
database error exists.
MFD1 DB ERR
– MFD1 Chartview
database error exists.
The MFD detected a failure in the ChartView
database (optional feature). Ensure the data card
is properly inserted. Replace data card. If problem
persists, system should be serviced.
MFD1 DB ERR
– MFD1 FliteCharts
database error exists.
The MFD detected a failure in the FliteCharts
database (optional feature). Ensure the data card
is properly inserted. Replace data card. If problem
persists, system should be serviced.
MFD1 DB ERR
– MFD1 Airport
Directory database error exists.
The MFD detected a failure in the Airport Directory
database. Ensure that the data card is properly
inserted. Replace data card. If problem persists, the
system should be serviced.
DB MISMATCH
– Navigation
database mismatch. Xtalk is off.
The PFD and MFD have different navigation
database versions or regions installed. Crossfill
is off. Check the AUX-SYSTEM STATUS Page
to determine versions or regions. Also, check
the AUX-SYSTEM STATUS Page for a database
synchronization function not completed. After
synchronization is complete, power must be turned
off, then on.
Comentários a estes Manuais