Garmin Software Version 1618.01 Guia do Utilizador Página 104

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 126
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 103
Garmin G1000 Cockpit Reference Guide for the Piper PA-28-181 Archer
190-01460-00 Rev. A
86
Annunciations & Alerts
Flight
InstrumentsEIS
Nav/Com/
XPDR/AudioGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
Features
Abnormal
OperationAnnun/AlertsAppendixIndex
MISCELLANEOUS MESSAGE ADVISORIES (CONT.)
Message Comments
PTK FAIL
– Parallel track unavailable:
past IAF.
IAF waypoint for parallel offset has been
passed.
UNABLE V WPT
– Can’t reach
current vertical waypoint.
The current vertical waypoint can not be reached
within the maximum flight path angle and vertical
speed constraints. The system automatically
transitions to the next vertical waypoint.
VNV
– Unavailable. Unsupported
leg type in flight plan.
The lateral flight plan contains a procedure turn,
vector, or other unsupported leg type prior to the
active vertical waypoint. This prevents vertical
guidance to the active vertical waypoint.
VNV
– Unavailable. Excessive track
angle error.
The current track angle error exceeds the limit,
causing the vertical deviation to go invalid.
VNV
– Unavailable. Excessive
crosstrack error.
The current crosstrack exceeds the limit,
causing vertical deviation to go invalid.
VNV
– Unavailable. Parallel course
selected.
A parallel course has been selected, causing
the vertical deviation to go invalid.
NON WGS84 WPT
– Do not use GPS
for navigation to [xxxx]
The position of the selected waypoint [xxxx]
is not calculated based on the WGS84 map
reference datum and may be positioned in
error as displayed. Do not use GPS to navigate
to the selected non-WGS84 waypoint.
TRAFFIC FAIL
Traffic device has
failed.
The system is no longer receiving data from
the traffic system. The traffic device should be
serviced.
FAILED PATH
A data path has
failed.
A data path connected to the GDU, GDL 69A,
or the GIA 63/W has failed.
[PFD1, or MFD1]
CARD 1 REM
Card 1 was removed. Reinsert card.
The SD card was removed from the top card
slot of the specified PFD or MFD. The SD card
needs to be reinserted.
[PFD1, or MFD1]
CARD 2 REM
Card 2 was removed. Reinsert card.
The SD card was removed from the bottom
card slot of the specified PFD or MFD. The SD
card needs to be reinserted.
Vista de página 103
1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 125 126

Comentários a estes Manuais

Sem comentários