
Garmin G1000 Cockpit Reference Guide for the Piper PA-28-181 Archer
190-01460-00 Rev. A 59
Additional Features
Flight
Instruments EIS
Nav/Com/
XPDR/Audio GPS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation Annun/Alerts Appendix Index
SCHEDULER
The Scheduler feature can be used to enter and display reminder messages (e.g., Change
oil, Altimeter-Transponder, or Hot Section Inspection or Phase 1 Maintenance Check) in
the Messages Window on the PFD. Message timers set to periodic alerting automatically
reset to the original timer value once the message is displayed. When power is cycled, all
messages are retained until deleted, and message timer countdown is resumed.
Entering a Scheduler Message
1)
Select the AUX - Utility Page.
2)
Press the FMS Knob momentarily to activate the flashing cursor.
3)
Turn the large FMS Knob to highlight the first empty scheduler message
naming field.
4)
Use the FMS Knob to enter the message text to be displayed in the
Messages Window and press the
ENT
Key.
5)
Press the ENT Key again or use the large FMS Knob to move the cursor to
the field next to Type.
6)
Turn the small FMS Knob to select the message type:
• Event—Message issued at the specified date/time
• One-time—Message issued when the message timer reaches zero
(default setting)
• Periodic—Message issued each time the message timer reaches zero
7)
Press the ENT Key again or use the large FMS Knob to move the cursor to
the next field.
8)
For periodic and one-time message, use the FMS Knob to enter the timer
value (HH:MM:SS) from which to countdown and press the ENT Key.
9)
For event-based messages:
a)
Use the FMS Knob to enter the desired date (DD-MM-YY) and press
the ENT Key.
b)
Press the ENT Key again or use the large FMS Knob to move the cursor
to the next field.
c)
Use the FMS Knob to enter the desired time (HH:MM) and press the
ENT Key.
10)
Press the ENT Key again or use the large FMS Knob to move the cursor to
enter the next message.
Comentários a estes Manuais