Garmin Legacy Software Versions Guia do Utilizador Página 113

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 112
190-00498-00 Rev. A
Garmin G1000 Pilot’s Guide for Cessna Nav III
5-5
AUDIO PANEL
Transmitting
NOTE:
Audio level of the COM radio(s) is
controlled by the COM volume controls located
on both the PFD and MFD (see the NAV/COM
section).
When a transmitter is keyed, the active transceiver
MIC key annunciator blinks approximately once per
second. A white TX indication appears next to the active
COM frequency on both the PFD and the MFD during
transmission.
OPTIONAL COM MUTING
COM muting on receive and COM muting on transmit
options can be disabled if desired. Contact a Garmin-
authorized service center for details.
COM Muting on Receive
NOTE
: If COM muting on receive option is
enabled, only primary COM radio reception is
recorded by the digital clearance recorder.
When COM muting on receive is enabled, all secondary
COM audio is muted during detection of received primary
COM audio.
COM Muting on Transmit
When COM muting on transmit is enabled, all
secondary COM audio is muted during transmission over
the primary COM radio.
SPLIT COM FUNCTION
NOTE
: Split COM performance varies
significantly across installations and is affected
by both the distance between the antennas
and the separation of the tuned frequencies.
Pressing the COM 1/2 key selects the split COM
function. During split COM operation, the COM1,
COM1 MIC, COM2, and COM2 MIC keys are active.
When the COM 1/2 key is selected, COM1 is used by
the pilot for transmission and COM2 is used by the copilot.
The COM1 MIC annunciator blinks when the pilot’s
microphone is keyed and the COM2 MIC annunciator
blinks when the copilot’s microphone is keyed.
In this mode, both the pilot and the copilot can transmit
simultaneously over separate radios. The pilot can still
monitor NAV1, NAV2, DME, ADF, and MKR audio as
selected, but the copilot is only able to monitor COM2.
Split COM mode is cancelled by pressing the
COM 1/2
key again.
PA FUNCTION
A passenger address function is provided by pressing
the PA key to deliver messages. Push-to-talk (PTT) must
be used to deliver PA announcements over the headsets
.
When PA is selected on the audio panel, the annunciator
blinks about once per second, the COM MIC annunciator
is no longer lit, and the active COM frequency for that
audio panel changes to white, indicating that there is no
COM selected.
Vista de página 112
1 2 ... 108 109 110 111 112 113 114 115 116 117 118 ... 363 364

Comentários a estes Manuais

Sem comentários