Garmin Legacy Software Versions Guia do Utilizador descarregar pdf (Página 210)

Garmin G1000 Pilot’s Guide for Cessna Nav III 190-00498-00 Rev. A

7-74

MULTI FUNCTION DISPLAY

SELECTING APPROACHES

In order to select an approach, there must be an active

ﬂight plan or direct-to which terminates at an airport with

a published approach.

To select an approach:

1. Press the

PROC

key to display the Procedures

Page. Turn the

large FMS

knob to highlight

‘Select Approach’ and press the

ENT

key. The

approach procedure window appears.

2. Turn the

FMS

knob to select the desired

approach and press the

ENT

key. The transition

window appears.

NOTE: The approach vectors option assumes

the pilot will receive vectors to the ﬁnal course

segment of the approach and will provide navi

gation guidance on the ﬁnal approach segment

and extension only.

3. Turn the

FMS

knob to select the desired transi-

tion and press the

ENT

key. ‘LOAD?’ is now

highlighted. Press the

ENT

key. Activate the

approach once the approach clearance is

received.

NOTE: ‘LOAD?’ will add the procedure to the

flight plan without immediately using it for

navigation guidance. This allows you to continue

navigating the original ﬂight plan, but keeps

the procedure available on the Active Flight

Plan Page for quick activation when needed.

‘ACTIVATE?’ overrides the enroute portion of

the active ﬂight plan, proceeding directly to the

approach portion.

NOTE: You can also load an approach by pressing

the

APR

softkey.

Figure 7-55 Activating an Approach Procedure

1 2 ... 205 206 207 208 209 210 211 212 213 214 215 ... 363 364

Comentários a estes Manuais

Sem comentários

Garmin Legacy Software Versions Guia do Utilizador Página 210

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de navegação Garmin Legacy Software Versions