
Garmin G1000 Pilot’s Guide for Cessna Nav III190-00498-00 Rev. A
7-25
MULTI FUNCTION DISPLAY
Traffic Group
The display of traffic information on the Navigation
Map Page closely resembles TCAS display symbology.
Traffic is only displayed on the Navigation Map Page if
aircraft heading data is available. If heading is not
available, traffic advisories are displayed as non-bearing
banners on the Navigation Map Page.
Figure 7-14 Traffic Group Options
To enable/disable traffic data on the Navi-
gation Map Page:
1. With the Navigation Map Page displayed, press
the
MENU
key to display the Navigation Map
Page Menu. The cursor flashes on the ‘Map
Setup’ option.
2. Press the
ENT
key. The Map Setup Menu is
displayed
3. Turn the
small FMS
knob to select the ‘Traffic’
group. Press the
ENT
key. The cursor flashes
on the ‘TRAFFIC’ field.
4. Turn the
small FMS
knob to select ‘On’ or
‘Off’.
5. Press the
ENT
key to accept the selected
option.
6. Press the
FMS
knob to return to the Navigation
Map Page.
The ‘Traffic’ mode selects which traffic is displayed (all
traffic, traffic and proximity advisories, or traffic advisories
only). The traffic symbol is the symbol used to depict the
type of traffic:
• Traffic Advisories (TA) – Yellow
• Proximity Advisories (PA) – White
• Other – White
Proximity Advisories (PAs) are displayed as solid white
Cessnas. PAs are defined as traffic within the 4.0 nm
range, within ± 1200 ft. of altitude separation, and are not
traffic advisories (TAs).
Comentários a estes Manuais