Garmin Legacy Software Versions Guia do Utilizador descarregar pdf (Página 69)

190-00498-00 Rev. A Garmin G1000 Pilot’s Guide for Cessna Nav III

2-39

PRIMARY FLIGHT DISPLAY

Figure 2-60 Departure Runway

NOTE: The runway window is not displayed for

every departure. ‘ALL’ may appear in the runway

ﬁeld, indicating that the departure procedure

applies to all runways. For airports with parallel

runways, ‘B’ may appear at the end of the runway

designation to indicate that the departure

procedure applies to both runways.

5. Turn the

FMS

knob to select the desired transi-

tion waypoint, then press the

ENT

key.

Figure 2-61 Departure Transition

6. With ‘LOAD?’ highlighted, press the

ENT

key.

Figure 2-62 Select Departure Window

Load Arrival

Load Arrival allows the pilot to select a published

standard terminal arrival route (STAR) for the destination

airport or replace a current arrival with a new selection.

NOTE

The PROC key can also be used to load a

departure, an approach, or an arrival.

NOTE: When adding an arrival to an active ﬂight

plan, the pilot may need to remove a duplicate

destination waypoint from the ﬂight plan list.

To select an arrival for a direct-to or ﬂight

plan destination airport:

1. From the Flight Plan Window, press the

key to display the page menu options.

2. Turn the

FMS

knob to highlight ‘Load Arrival’,

then press the

ENT

key. A window appears

listing the available arrivals for the destination

airport.

3. Turn the

FMS

knob to select the desired arrival,

then press the

ENT

key. A window appears

listing available transitions for the arrival.

4. Turn the

FMS

knob to select the desired transi-

tion waypoint, then press the

ENT

key.

5. A window may appear listing runways for the

arrival. Turn the

FMS

knob to select the desired

runway, then press the

ENT

key.

NOTE: The runway window is not displayed for

every arrival. ‘ALL’ may appear in the runway

field, indicating that the arrival procedure

applies to all runways. For airports with parallel

runways, ‘B’ may appear at the end of the runway

designation to indicate that the arrival procedure

applies to both runways.

6. With ‘LOAD?’ highlighted, press the

ENT

key.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 363 364

Comentários a estes Manuais

Sem comentários

Garmin Legacy Software Versions Guia do Utilizador Página 69

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de navegação Garmin Legacy Software Versions