
Garmin G1000 Pilot’s Guide for Cessna Nav III 190-00498-00 Rev. A
7-4
MULTI FUNCTION DISPLAY
ELECTRONIC CHECKLISTS (OPTIONAL)
The G1000 Multi Function Display provides optional
checklists which allow a pilot to quickly find the proper
procedure on the ground and during each phase of flight.
NOTE: The checklist information described
in this section is not intended to replace the
checklist information described in the Aircraft
Flight Manual and the Pilot Safety and Warning
Supplements document.
NOTE: Garmin is not responsible for the content
of the checklists. User-defined checklists are cre-
ated by the aircraft manufacturer. Additionally,
modifications or updates to the checklists are
coordinated through the aircraft manufacturer.
The user cannot edit the checklists.
Displaying the Checklist Page (Figure 7-3)
The Splash Screen displays the current checklist file
that is installed for the Cessna Nav III aircraft. If no
checklist is present, then the Spalsh Sceen displays the text
“CHECKLIST FILE NOT PRESENT” and the CHKLIST
softkey is greyed out.
To select the Checklist Page:
1. From any page, press the
CHKLIST
softkey.
Selecting a Procedure Group
Depending on the specific airframe, there are a certain
number of groups of procedures with their respective
checklists available to the pilot.
To select a procedure group:
1. Press the
CHKLIST
softkey.
2. Turn the
large FMS
knob to select the ‘GROUP’
field.
3. Turn the
small FMS
knob to select the desired
procedure and press the
ENT
key.
Selecting a Checklist within the Procedure
Group
1. Turn the
large FMS
knob to select the ‘Checklist’
field.
2. Turn the
FMS knob
to select the desired checklist
and press the
ENT
key.
Comentários a estes Manuais