
Garmin G2000 Cockpit Reference Guide for the Cessna Corvalis T240
190-01264-02 Rev. A
68
Hazard Avoidance
Flight
InstrumentsEIS
Nav/Com/
XPDR/AudioAFCSFMS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
AlertsAppendixIndex
Selecting an obstacle display range on the navigation map:
1)
From the Home Screen, touch Map > Map Settings.
2)
If necessary, touch the Land Tab.
3)
Touch the Obstacle Data Button to enable/disable the Obstacle Data.
Obstacle Data is enabled when the button annunciator is green, disabled
when gray.
4)
Touch the current range button (10 NM is selected by default) to display
the Map Obstacle Range.
5)
Scroll through the list and touch a range button to select the maximum
map range at which the system shows obstacle data.
Customizing the traffic display on the navigation map:
1)
From the Home Screen, touch Map > Map Settings.
2)
If necessary, touch the Sensor Tab.
3)
Touch the Traffic Button to enable/disable the display of traffic. Traffic is
enabled when the button annunciator is green, disabled when gray.
4)
Touch the Traffic Settings Button to select which traffic symbols are to be
shown:
Mode
-
TA/RA Button - Displays Traffic Advisories and Resolution Advisories
-
TA Only Button - Displays only Traffic Advisories.
-
Standby Button - No traffic is displayed on the navigation map.
Altitude Range
-
Unrestricted: All traffic is displayed from 9900 feet above and
9900 feet below the aircraft.
-
Above: Displays non-threat and proximity traffic from 9000 feet
above the aircraft to 2700 feet below the aircraft. Typically used during
climb phase of flight.
-
Normal: Displays non-threat and proximity traffic from 2700 feet
above the aircraft to 2700 feet below the aircraft. Typically used during
enroute phase of flight
-
Below: Displays non-threat and proximity traffic from 2700 feet
above the aircraft to 9000 feet below the aircraft. Typically used during
descent phase of flight.
Comentários a estes Manuais