Garmin Software Version 0858.09 Manual de Instruções descarregar pdf (Página 24)

Page 3-6 G1000 System Maintenance Manual - Hawker Beechcraft G36

Rev. 5 190-01259-00

IMPORTANT

To satisfy the requirements of this STC it is critical that the technician

install correct software image part number when servicing the G1000

system. Approved software image part numbers are defined on the

General Arrangement Drawing 005-00620-06 listed in Table 1.1

CAUTION

Be cautious when using software loader cards during maintenance. The

G1000 system immediately initializes the card upon power-up. On-

screen prompts must be given careful attention in order to avoid

potential loss of data.

3.6.3 Software Loader Card Creation

The software image is an executable self-extracting file which builds the correct file structure

onto an SD card for use loading software to the G1000 and GFC700. To obtain the current file

follow the procedures outlined below.

NOTE

In order to create a loader card, the installer completing these

procedures must be an authorized Hawker Beechcraft service center to

gain access to the necessary data via the Garmin website.

NOTE

Screenshots contained in this section is dependent upon the computer

being used to download the updates and its operating system.

a. Go to www.garmin.com and click on the Dealer Resource Center link in the lower

portion of the home page. Enter User name and Password in the Sign In area at the

left of the page.

b. Click the Agree button on the confidentiality agreement page.

c. Select the Download Software link.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 78 79

Sem comentários

Garmin Software Version 0858.09 Manual de Instruções Página 24