Garmin Software Version 0858.09 Manual de Instruções descarregar pdf (Página 38)

Page 3-20 G1000 System Maintenance Manual - Hawker Beechcraft G36

Rev. 5 190-01259-00

3.10.1 SVS Activation Procedure

Activate the SVS/Pathways feature by performing the following steps:

a. Apply power to the G1000 system.

b. Pull the MFD and PFD circuit breakers.

c. A special SVS Enable card is required to activate this feature, refer to Table 3.2. Insert this

card in the upper slot of PFD.

d. While holding the ENT key on the PFD and MFD restore power to the displays.

e. When the words

appear in the upper left corner of the displays,

release the ENT key.

f. From PFD, accomplish the following:

g. Go to the System Upload page using the small FMS knob.

• Activate the cursor. Use the small FMS knob to select CONFIGURATION FILES in

the AIRFRAME field and press the ENT key.

• Highlight the FILE field. Use the small FMS knob to select the Enable SVS option

and press the ENT key. Once the option is selected the configuration files in the

PRODUCT field will be displayed. All files should be checked. If not, press the CHK

ALL softkey.

• Press the LOAD softkey.

• Monitor the status of the upload. When the upload is finished, press the ENT key to

acknowledge the upload complete confirmation.

h. View the SUMMARY field and ensure that the item is COMPLETE.

i. De-activate the cursor.

j. Power down the system and remove the SVS Enable card from the PFD.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 78 79

Sem comentários

Garmin Software Version 0858.09 Manual de Instruções Página 38