Garmin Software Version 0858.09 Manual de Instruções descarregar pdf (Página 40)

Page 3-22 G1000 System Maintenance Manual - Hawker Beechcraft G36

Rev. 5 190-01259-00

3.12 TAWS-B Enable Procedure

NOTE

The TAWS-B Enable card can only enable TAWS on one system (one

aircraft). A new TAWS Enable card must be used for each aircraft.

a. Remove power from the MFD and PFD by pulling the PFD and MFD circuit breakers.

b. Insert the TAWS Enable card, 010-00330-51 in the upper slot of the PFD.

c. While holding the ENT key on the PFD and MFD restore power to the displays.

d. When the words

appear in the upper left corner of the

displays, release the ENT key.

e. On the PFD, go to the System Upload page.

f. Activate the cursor and use the small FMS knob to activate the drop down menu and

select CONFIGURATION FILES in the AIRFRAME field. Press ENT.

g. Use the small FMS knob to activate the drop down menu and select ENABLE TAWS

in the FILE field. Press ENT.

h. Verify there is a check mark in the box in the configuration column for AIRFRAME.

i. Press the LOAD softkey.

j. Monitor the status of the upload. When the upload is finished, Complete and Pass is

displayed. Press ENT.

k. De-activate the cursor.

l. Power down the system and remove the TAWS-B Enable card from the PFD.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 78 79

Sem comentários

Garmin Software Version 0858.09 Manual de Instruções Página 40